[conspire] Smartmontools-- smartctl
John Andrews
jla1200 at netzero.net
Fri Jan 4 15:24:09 PST 2008
Can someone tell me why this disk failed the test. It's my original win98
disk. The overall health passed. I can access files/.jpg off it with
Gwenview from the other disk but it doesn't bootup.The failed part is near
the bottom of the page.I WAS READING SOMETHING THAT SAID UBUNTU WAS DAMAGING
TO DISK WHICH LEAD ME TO THIS TOOL.
jla at Home:~$ sudo smartctl -a /dev/sda
[sudo] password for jla:
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Maxtor DiamondMax 20 VL family
Device Model: Maxtor 91531U3
Serial Number: G309W3LC
Firmware Version: FA520860
User Capacity: 15,367,790,592 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 4
ATA Standard is: ATA/ATAPI-4 T13 1153D revision 17
Local Time is: Fri Jan 4 14:59:33 2008 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 118) The previous self-test completed
having
the read element of the test failed.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off
supp
ort.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x03) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 13) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_
FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000a 253 252 000 Old_age
Always -
1387274750902
3 Spin_Up_Time 0x0027 231 231 063 Pre-fail
Always -
50
4 Start_Stop_Count 0x0032 253 253 000 Old_age
Always -
450
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail
Always -
2
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail
Offline -
0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age
Always -
97823
8 Seek_Time_Performance 0x0027 251 249 187 Pre-fail
Always -
258445362774755
9 Power_On_Minutes 0x0032 252 252 000 Old_age
Always -
673h+30m
10 Spin_Retry_Count 0x002b 253 252 223 Pre-fail
Always -
93
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail
Always -
74
12 Power_Cycle_Count 0x0032 249 249 000 Old_age
Always -
1723
196 Reallocated_Event_Count 0x0008 251 251 000 Old_age
Offline -
2
197 Current_Pending_Sector 0x0008 251 251 000 Old_age
Offline -
2
198 Offline_Uncorrectable 0x0008 252 252 000 Old_age
Offline -
1
199 UDMA_CRC_Error_Count 0x0008 200 200 000 Old_age
Offline -
0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age
Always -
307021
201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age
Always -
314294
202 TA_Increase_Count 0x000a 253 252 000 Old_age
Always -
314294
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail
Always -
314294
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age
Always -
314294
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age
Always -
314294
207 Spin_High_Current 0x002a 253 252 000 Old_age
Always -
93
208 Spin_Buzz 0x002a 253 252 000 Old_age
Always -
93
209 Offline_Seek_Performnce 0x0024 253 253 000 Old_age
Offline -
0
96 Unknown_Attribute 0x0004 253 253 000 Old_age
Offline -
0
97 Unknown_Attribute 0x0004 253 253 000 Old_age
Offline -
0
98 Unknown_Attribute 0x0004 253 253 000 Old_age
Offline -
0
99 Unknown_Attribute 0x0004 253 253 000 Old_age
Offline -
0
100 Unknown_Attribute 0x0004 253 253 000 Old_age
Offline -
0
101 Unknown_Attribute 0x0004 253 253 000 Old_age
Offline -
0
SMART Error Log Version: 1
ATA Error Count: 2700 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
I REALLY DON'T KNOW WHAT ANY OF THIS STUFF MEANS!!
Error 2700 occurred at disk power-on lifetime: 630 hours (26 days + 6 hours)
When the command that caused the error occurred, the device was in an
unknown
state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 0b 4f c2 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d4 00 01 4f c2 00 08 03:55:27.712 SMART EXECUTE OFF-LINE IMMEDIATE
f8 00 00 01 00 00 e0 08 03:55:27.664 READ NATIVE MAX ADDRESS
ec 00 00 01 00 00 a0 0a 03:55:27.664 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 0a 03:55:27.648 SET FEATURES [Set transfer mode]
f8 00 00 01 00 00 e0 08 03:55:27.648 READ NATIVE MAX ADDRESS
Error 2699 occurred at disk power-on lifetime: 630 hours (26 days + 6 hours)
When the command that caused the error occurred, the device was in an
unknown
state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 01 0b 4f c2 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d1 01 01 4f c2 00 08 03:55:27.632 SMART READ ATTRIBUTE THRESHOLDS
[OB
S-4]
f8 00 00 01 00 00 e0 08 03:55:27.632 READ NATIVE MAX ADDRESS
ec 00 00 01 00 00 a0 0a 03:55:27.616 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 0a 03:55:27.616 SET FEATURES [Set transfer mode]
f8 00 00 01 00 00 e0 08 03:55:27.616 READ NATIVE MAX ADDRESS
Error 2698 occurred at disk power-on lifetime: 630 hours (26 days + 6 hours)
When the command that caused the error occurred, the device was in an
unknown
state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 01 0b 4f c2 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d0 01 00 4f c2 00 08 03:55:27.600 SMART READ DATA
f8 00 00 01 00 00 e0 08 03:55:27.568 READ NATIVE MAX ADDRESS
ec 00 00 01 00 00 a0 0a 03:55:27.568 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 0a 03:55:27.552 SET FEATURES [Set transfer mode]
f8 00 00 01 00 00 e0 08 03:55:27.552 READ NATIVE MAX ADDRESS
Error 2697 occurred at disk power-on lifetime: 630 hours (26 days + 6 hours)
When the command that caused the error occurred, the device was in an
unknown
state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 0b 4f c2 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 da 00 01 4f c2 00 08 03:55:27.536 SMART RETURN STATUS
f8 00 00 01 00 00 e0 08 03:55:27.520 READ NATIVE MAX ADDRESS
ec 00 00 01 00 00 a0 0a 03:55:27.504 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 0a 03:55:27.504 SET FEATURES [Set transfer mode]
f8 00 00 01 00 00 e0 08 03:55:27.504 READ NATIVE MAX ADDRESS
Error 2696 occurred at disk power-on lifetime: 630 hours (26 days + 6 hours)
When the command that caused the error occurred, the device was in an
unknown
state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 0b 4f c2 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 da 00 01 4f c2 00 08 03:55:27.472 SMART RETURN STATUS
ec 00 01 00 00 00 00 08 03:55:27.456 IDENTIFY DEVICE
ec 00 01 00 00 00 00 08 03:55:27.456 IDENTIFY DEVICE
f8 00 00 01 00 00 e0 08 03:22:20.592 READ NATIVE MAX ADDRESS
ec 00 00 01 00 00 a0 0a 03:22:20.592 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA _of_first_error
# 1 Extended offline Completed: read failure 60% 630
221 6458
# 2 Short offline Completed: read failure 60% 630
905 1618
Device does not support Selective Self Tests/Logging
jla at Home:~$ sudo smartctl -a /dev/sda
More information about the conspire
mailing list