[conspire] Problem accessing SATA controller

Mark S Bilk mark at cosmicpenguin.com
Tue Nov 6 06:50:50 PST 2007

Thanks for the help, Rick!

There's a SATA_EN jumper on the motherboard (mentioned in a 
different place in the manual than where the SATA connectors 
are described) that was set wrong.  Now the 300 GB disk is 
seen by the BIOS and by SuSE 9.3, with driver modules loading 

Now to see if openSuSE 10.3 will install, and format the 
500 GB SATA disk when it's the only one in the system.

Question: After 10.3 is installed on the SATA disk, when I 
mount the previous PATA disks so I can copy their data to 
the SATA disk, what is udev going to call them.  It was 
so much simpler before udev!


More information about the conspire mailing list