Linux version 2.4.25 (n6tadam@station) (gcc version 3.3.3 (Debian 20040320)) #2 SMP Wed Mar 24 15:15:41 GMT 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
512MB LOWMEM available.
On node 0 totalpages: 131072
zone(0): 4096 pages.
zone(1): 126976 pages.
zone(2): 0 pages.
DMI not present.
ACPI: Unable to locate RSDP
Kernel command line: BOOT_IMAGE=linux ro root=343 S
No local APIC present or hardware disabled
Initializing CPU#0
Detected 334.092 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 666.82 BogoMIPS
Memory: 514944k/524288k available (1856k kernel code, 8956k reserved, 714k data, 148k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Enabling new style K6 write allocation for 512 Mb
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU:     After generic, caps: 008021bf 808029bf 00000000 00000002
CPU:             Common caps: 008021bf 808029bf 00000000 00000002
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: AMD K6
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU:     After generic, caps: 008021bf 808029bf 00000000 00000002
CPU:             Common caps: 008021bf 808029bf 00000000 00000002
CPU0: AMD-K6(tm) 3D processor stepping 0c
per-CPU timeslice cutoff: 182.76 usecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfdb61, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router SIS5595 [1039/0008] at 00:01.0
SiS pirq: IDE/ACPI/DAQ mapping not implemented: (97)
SiS router unknown request: (97)
PCI: Cannot allocate resource region 0 of device 01:00.0
PCI: Cannot allocate resource region 1 of device 01:00.0
PCI: Cannot allocate resource region 2 of device 01:00.0
isapnp: Scanning for PnP cards...
isapnp: CMI8330 quirk - fixing interrupts and dma
isapnp: Card 'CMI8330/C3D Audio Adapter'
isapnp: 1 Plug & Play card detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver v1.1.22 [Flags: R/O]
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
kmod: failed to exec /sbin/modprobe -s -k parport_lowlevel, errno = 2
lp: driver loaded but no devices found
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
kmod: failed to exec /sbin/modprobe -s -k parport_lowlevel, errno = 2
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 440M
agpgart: Unsupported SiS chipset (device id: 5591), you might want to boot with agp=try_unsupported
agpgart: no supported devices found.
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:00.1
SiS pirq: IDE/ACPI/DAQ mapping not implemented: (97)
SiS router unknown request: (97)
SiS pirq: IDE/ACPI/DAQ mapping not implemented: (97)
SiS router unknown request: (97)
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS5591/2 ATA 33 controller
    ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio
hda: ST34321A, ATA DISK drive
hdb: WDC AC26400B, ATA DISK drive
blk: queue c03fe2c0, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03fe408, I/O limit 4095Mb (mask 0xffffffff)
hdd: CD-ROM CDR_S16, ATAPI CD/DVD-ROM drive
hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdd: set_drive_speed_status: error=0x04
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 8404830 sectors (4303 MB) w/128KiB Cache, CHS=523/255/63, UDMA(33)
hdb: attached ide-disk driver.
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: host protected area => 1
hdb: 12594960 sectors (6449 MB) w/512KiB Cache, CHS=784/255/63, UDMA(33)
hdd: attached ide-cdrom driver.
hdd: ATAPI 6X CD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2
 /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 p4
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: CMI8330/C3D Audio Adapter detected
sb: ISAPnP reports 'CMI8330/C3D Audio Adapter' at i/o 0x220, irq 5, dma 1, 5
sb: 1 Soundblaster PnP card(s) found.
AWE32: No ISAPnP cards found
AWE32: not detected
es1371: version v0.32 time 15:31:21 Mar 24 2004
Creative EMU10K1 PCI Audio Driver, version 0.20, 15:28:36 Mar 24 2004
usb.c: registered new driver hub
host/uhci.c: USB Universal Host Controller Interface driver v1.1
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
IPv4 over IPv4 tunneling driver
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 148k freed
Adding Swap: 72256k swap-space (priority -1)
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
NET3 PLIP version 2.4-parport gniibe@mri.co.jp
plip0: Parallel port at 0x378, using IRQ 7.
lp0: using parport0 (interrupt-driven).