From rick Mon Nov 18 09:51:04 2002
Date: Mon, 18 Nov 2002 09:51:04 -0800
Subject: Re: Relaying
X-Mas: Bah humbug.
Quoting sola omosebi (firstname.lastname@example.org):
> "The message could not be sent because one of the
recipients was rejected
> by the server. The rejected e-mail address was 'email@example.com'.
> Subject 'Fw: Cisco CertManager Login information', Account:
> 'mail.kaktos.com', Server: 'mail.kaktos.com', Protocol: SMTP, Server
> Response: '551 we do not relay', Port: 25, Secure(SSL): No, Server Error:
> 551, Error Number: 0x800CCC79."
So, turn on relaying.
Cheers, "All power is delightful, but absolute power
Rick Moen is absolutely delightful." - Kenneth Tynan
In article firstname.lastname@example.org,
Joe Little wrote:
> furthermore, beware that the default sendmail.cf file supplied by
> RedHat has sendmail listening on the loopback interface only.
> Look for 127.0.0.1 in that file, and replace it with 0.0.0.0
> (DaemonOptions should be in the config line)
Yeah, I did this back in June when upgrading from Redhat 6.0
to 7.3 so
we could have group mail lists accessible from on-campus machines. I
think RedHat recommends editing /etc/mail/sendmail.mc to add a "dnl"
at the beginning of the DAEMON_OPTIONS macro line. This procedure is
surely baffling to anyone not familiar with m4 :-)
From: email@example.com (Miles
Subject: Re: [SULinux] how to turn on sendmail in 7.3?
Date: 22 May 2002 21:56:37 GMT
Organization: Stanford University
User-Agent: slrn/0.9.6.0 (Linux)
On 22 May 2002 21:39:36 GMT, Leif Harcke firstname.lastname@example.org wrote:
>sendmail only accepts connections from localhost. How do
>it to accept connections from any machine?
Comment out the following line in /etc/mail/sendmail.mc:
dnl DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')
or change it to this:
and rebuild the cf file: m4 sendmail.mc >/etc/sendmail.cf
[The following two posts answer a very similar but slightly different
From: Richard Keech email@example.com
Subject: Re: Chaining Mail Servers
To: megan woods firstname.lastname@example.org
Cc: Linux Users of Victoria email@example.com
X-Mailer: Ximian Evolution 1.0.8 (1.0.8-10)
On Thu, 2002-12-05 at 20:32, megan woods wrote:
> Is it possible to configure Sendmail or some other mail
> software to relay all outgoing mail via another mail server regardless
> of destination..
> Client --> MTA1 -->MTA2 --> Internet -> final destination.
for sendmail on mta1, in /etc/mail/sendmail.mc add the line
then rebuild sendmail.cf
m4 sendmail.mc > sendmail.cf
Or add directly to sendmail.cf: